Configurations:listing of, Table, Table heading – HP Surestore 660ex Optical Jukebox User Manual
Page 61: Table row, Configuration name, Description, Table body, Recovery on/off, Toggles between on and off. if the configuration i, Restore defaults
Chapter 3
3-21
Operating the Jukebox
Setting an Operating Configuration
Op
eratin
g th
e
Ju
kebo
x
Table 3-1
Configuration Choices
Configuration
Name
Description
RECOVERY
ON/OFF
Toggles between
ON
and
OFF
. If the configuration is
set to
ON
, the jukebox attempts to recover from errors;
if the configuration is set to
OFF
, the jukebox
immediately stops moving if an error condition occurs.
The default configuration is
RECOVERY ON
, and
recovery should remain
ON
under normal conditions.
RESTORE
DEFAULTS
Sets all jukebox configurations to default settings.
CLEAR
ODOMETERS
Used by service personnel only. Sets all jukebox
odometers to zero.
DUAL PICKER
ON/OFF
Toggles between
ON
and
OFF
. (The default setting is
DUAL PICKER ON
, and dual picker mode should
remain
ON
under normal conditions.) If the
configuration is set to
ON
, the jukebox runs with dual
picker (disk transport) addressing
ON
; if the
configuration is set to
OFF
, the jukebox runs with dual
picker (disk transport) addressing
OFF
.
STARWARS
ON/OFF
Used by service personnel only. Should be set to
ON
during normal operation. Toggles between
ON
and
OFF
. The
ON
configuration enables the vertical
sensors; the
OFF
configuration disables the vertical
sensors.
NEW PASSWORD
Allows you to change the numerical password required
to access the menu choices under the
ADMIN *
menu
on the jukebox control panel. These choices include
configurations, tests, and information logs. To change
the security code, see “Changing the Administration
Menu Password” in this chapter.
SCSI LOG
ON/OFF
Used by service personnel only. Should be set to
OFF
during normal operation. Toggles between
ON
and
OFF
. Tracks internal SCSI states and saves the
information to a log.