HP XP P9000 Command View Advanced Edition Software - Manual (Page 250)

2. Select the process of Application Agent (the process with the name starting with “drm”) in the
Image Name column of the Processes tab.
3. Click End Process.
4. Open the trace log file of Application Agent and confirm the P9000 RAID Manager process
name output to the last record of the log. The path of the file is:
Installation-destination-of-Application Agent\DRM\log\drm_pp_traceX.log
5. Select the process of P9000 RAID Manager in the Image Name column of the Processes tab.
6. Click End Process.
Unsupported copy group configurations defined in storage
The following configurations are not supported:
• The number of volumes differs between copy groups defined in storage.
• The device name of a copy-pair target volume differs from that of a copy-pair source volume.
Managing pair life cycle 250