HP StorageWorks XP Remote Web Console Software User Manual
Hp 200 storage virtualization system
Advertising
HP StorageWorks
XP External Storage Software User Guide
HP XP12000 Disk Array
nl
HP XP10000 Disk Array
nl
HP 200 Storage Virtualization System
Abstract
This document provides information about preparing for, performing, and troubleshooting HP StorageWorks
XP External Storage operations; connecting external arrays; and using an XP12000/XP10000/SVS200 with
EVA3000/50000.
Part Number: T1706-96017
Seventeenth edition: June 2010
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- XP External Storage Software User Guide
- Contents
- 1 Overview of connecting external arrays
- 2 Preparing for XP External Storage operations
- Supported storage platforms and firmware
- Prerequisites
- System requirements
- XP External Storage requirements
- Installing XP External Storage
- Preparing for XP External Storage settings
- Powering arrays on or off
- Using mapped external LUs from the host connected to the local array
- Uninstalling XP External Storage
- Limitations on XP External Storage operations
- Combining XP External Storage with other HP StorageWorks products
- 3 Managing cache with external storage
- 4 XP External Storage panes
- 5 Configuring external LUs
- Overview of configuring external LUs
- Setting an external array's port
- Setting a local array's port attributes
- Discovering and Mapping LUs
- Setting alternate paths for external LUs
- Adding alternate paths by selecting multiple external LUs (Add Paths)
- Deleting alternate paths by selecting multiple external LUs (Delete Paths)
- Checking an external LU's status (LDEV Information)
- Disconnecting external arrays or LUs
- Checking the connection status and resuming external LU operations (Check Paths & Restore Vol.)
- Restoring external LUs (LDEV Restore)
- Changing the cache mode setting of the external LU
- Changing the cache mode of all external LUs in an external array
- Changing the cache mode of an individual external LU
- Stopping the use of paths to an external LU by specifying an external array's WWN (Disconnect Paths)
- Restoring paths to an external LU by specifying an external array's WWN (Check Paths)
- Changing an external array's port setting
- Stopping the use of paths to an external LU by specifying a local array's port (Disconnect Paths)
- Restoring paths to an external LU by specifying a local array's port (Check Paths)
- Deleting external LU mappings (Delete LU)
- 6 Troubleshooting NAS Blade systems that include external arrays
- 7 Remote command devices
- 8 Troubleshooting XP External Storage
- 9 Support and other resources
- A Notes on connecting external arrays
- Connecting Thunder 9500V subsystems
- System parameters for connecting Thunder 9500V subsystems
- Relationship between serial number and array model of Hitachi Thunder 9500V subsystem
- Relationship between the WWN of the port on the Thunder 9500V subsystem and the controller
- Path status and examples of recovery procedures (Thunder 9500V subsystems)
- Connecting TagmaStore AMS and TagmaStore WMS subsystems
- System parameters for connecting TagmaStore AMS and TagmaStore WMS subsystems
- Relationship between serial numbers in device list on the LU operation panel and TagmaStore AMS and TagmaStore WMS subsystem models
- Relation between the WWN of the port on the TagmaStore AMS or TagmaStore WMS subsystem and controller
- Path status and examples of recovery procedure (TagmaStore AMS and TagmaStore WMS subsystems)
- Notes When Power Saving Feature is Used (For TagmaStore AMS Subsystem, TagmaStore WMS Subsystem)
- Connecting XP24000/XP20000 Disk Arrays
- Connecting XP12000/XP10000 Disk Arrays
- Connecting XP1024/XP128 Disk Arrays
- Connecting XP512/XP48 Disk Arrays
- Connecting HP 200 Storage Virtualization System as external storage
- Connecting EVA arrays
- System parameter settings for connecting EVA arrays
- Identifying logical volumes of EVA arrays (using Characteristic 2)
- Alternate path's behavior when an EVA array is connected
- System parameter settings for connecting Sun StorEdge 6120/6320
- System parameter settings for connecting Sun StorageTek FlexLine 380
- System parameter settings for connecting Sun StorageTek 2540
- Alternate paths for connecting Sun StorageTek V2X2
- Connecting EMC CLARiiON CX Series
- Notes on Connecting EMC CLARiiON CX Series
- System Parameter for Connecting EMC Symmetrix Series
- System parameter settings for connecting IBM DS4000 Series
- Alternate Path Mode for Connecting IBM DS8000 Series
- Non-HP arrays
- Connecting Thunder 9500V subsystems
- B Required volume capacity for emulation types
- C Adjusting volume capacity for copy pair setting
- Index