HP Officejet Pro 8500 - Manual (Page 111)

9 Copy
You can produce high-quality color and grayscale copies on a variety of paper types
and sizes.
NOTE: If you are copying a document when a fax arrives, the fax is stored in the
device memory until the copying finishes. This can reduce the number of fax pages
stored in memory.
This section contains the following topics:
• Make copies from the device control panel
• Change the copy settings
• Set the number of copies
• Set the copy paper size
• Set the copy paper type
• Change copy speed or quality
• Resize an original to fit onto letter or A4 paper
• Copy a legal-size document onto letter paper
• Crop an original (color display models only)
• Adjust the lightness and darkness of your copy
• Enhance light areas of your copy
• Collate a copy job
• Apply Margin Shift to a Copy Job
• Two-sided copy jobs
• Cancel a copy job
Make copies from the device control panel
You can make quality copies from the device control panel.
To make a copy from the device control panel
1. Make sure you have paper loaded in the input tray.
2. Place your original face down on the scanner glass or load originals in the ADF.
For more information, see Load the originals .
3. Do one of the following:
• Press START COPY Black to start a black-and-white copy job.
• Press START COPY Color to start a color copy job.
NOTE: If you have a color original, pressing START COPY Black produces a
black-and-white copy of the color original. Pressing START COPY Color
produces a full-color copy of the color original.
Copy 107