Network toolbox – HP Officejet Pro 8500 User Manual
Page 124
Tabs
Contents
Services
•
Print a Self Test Diagnostic Page: Allows
you to print the self-test diagnostic page of the
device. This page contains information about
the device and the supplies. For more
information, see
Understand the self-test report
.
•
Print a Print Quality Diagnostic Page: Allows
you to print the print-quality diagnostic report of
the device. This page contains information
about the device and ink cartridges.
•
Align Printheads: Guides you through
aligning the printheads. For more information,
see
•
Clean Printheads: Guides you through
cleaning the printheads. For more information,
see
•
Calibrate linefeed : Allows you to calibrate the
colors that are printed.
•
Paper Handling: Allows you to set the default
tray or to lock a tray.
Network Settings
Gives information on the network settings. Also
includes a button that allows you to open the
Network Toolbox and change some network
settings.
Network Toolbox
The Network Toolbox allows you to view and change some network settings. You can
change the IP address, turn the wireless radio on or off, perform tests, and print reports.
To open the Network Toolbox
1. Open the Toolbox
2. Click the Network Settings tab.
3. Click the Change Settings... button.
Network Toolbox tab
1. General: Shows the current network connection setting of the printer
2. Wired settings: Enable the user to change the IP Settings and DNS server for a
wired connection
3. Wireless settings (only available if the printer supports wireless connection):
Enable the user to turn the wireless radio On or Off and to change the IP address
or DNS server
4. Utilities:
a. Run Network Diagnostic – to perform network troubleshooting
b. Print Wireless Network Test Report – only for printers with wireless capability
c. View Wireless Network Tutorial – only for printers with wireless capability
d. View Wireless Network FAQs – only for printers with wireless capability
Chapter 10
(continued)
120
Configure and manage