Configure the device (windows), Direct connection, Network connection – HP Officejet Pro 8500 User Manual

Page 158

Advertising
background image

Switzerland (German)

www.hp.com/ch/de/faxconfig

United Kingdom

www.hp.com/uk/faxconfig

Finland

www.hp.fi/faxconfig

Denmark

www.hp.dk/faxconfig

Sweden

www.hp.se/faxconfig

Norway

www.hp.no/faxconfig

Netherlands

www.hp.nl/faxconfig

Belgium (Dutch)

www.hp.be/nl/faxconfig

Belgium (French)

www.hp.be/fr/faxconfig

Portugal

www.hp.pt/faxconfig

Spain

www.hp.es/faxconfig

France

www.hp.com/fr/faxconfig

Ireland

www.hp.com/ie/faxconfig

Italy

www.hp.com/it/faxconfig

Configure the device (Windows)

NOTE: Microsoft Internet Explorer 6.0 or higher must be installed on the
computer system to run the installation program.
In addition, you must have administrator privileges to install a printer driver on
Windows 2000, Windows XP, or Windows Vista.

When setting up the device, HP recommends that you connect it after you install the
software. The installation program is designed to provide you with the easiest setup
experience. However, if you have connected the cable first, see

Connect the device

before installing the software

.

This section contains the following topics:

Direct connection

Network connection

Direct connection

You can connect the device directly to your computer using a USB cable.

NOTE: If you install the device software and connect the device to a computer
running Windows, you can connect additional devices to the same computer with
USB cables without reinstalling the device software.

When setting up the device, HP recommends that you connect the device only when
prompted by the software. However, if you have connected the cable first, see

Connect the device before installing the software

.

Chapter 10

(continued)

154

Configure and manage

Advertising