HP Officejet Pro 8500 - Manual (Page 44)

Media (1) Left
margin (2) Right
margin (3) Top
margin (4) Bottom
margin
B5
A5
Cards
Custom-sized media
Photo media
Envelopes 3.3 mm (0.13
inch) 3.3 mm (0.13
inch) 16.5 mm
(0.65 inch) 16.5 mm
(0.65 inch)
NOTE: If you are using the duplexer, the minimum top and bottom margins must
match or exceed 12 mm (0.47 inch).
Load media
This section provides instructions for loading media into the device.
NOTE: Tray 2 is available with some models. For ordering information, see Order
printing supplies online .
To load Tray 1 (main tray)
1. Lift the output tray.
2. Insert the media print-side down in the center of the tray. Make sure the stack of
media aligns with the line on the width guide, and is not higher than the paper
stack line on the guide.
NOTE: Do not load paper while the device is printing.
Chapter 3
(continued)
40 Use the device