HP Scitex FB700 Industrial Printer User Manual
HP Printers
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Introduction
- Configure and load media
- Load inks
- Printing jobs
- Use white ink
- Use the control panel
- Calibrate the printer
- Accessories
- User cleaning
- Schedule of tasks
- Substitute cleaning procedures for air quality regulatory compliance
- Replace UV lamp bulb (500–1000 hours)
- Clean the rail encoder strip (bi-weekly)
- Clean ionizer needles (quarterly)
- Clean and lubricate rail strips (bi-weekly)
- Clean the print head orifice plates (bi-weekly)
- Clean and lubricate the service station rails (monthly)
- Clean service station wiper (monthly)
- Clean carriage wheels (monthly)
- Vacuum bottom of carriage (monthly)
- Clean the carriage home sensor (monthly)
- Replace the UV lamp filters (quarterly)
- Clean the electronics box filters (quarterly)
- Replace the service station wiper (quarterly)
- Drain waste from service station (quarterly)
- Clean the media thickness sensor roller (quarterly)
- Specifications
- Troubleshooting
- Image quality tips
- Index