HP Scanjet Enterprise Flow 7000 s2 Sheet-feed Scanner - Manual (Page 12)

5. Using the paper path cleaning cloth that came with your scanner (or a clean, lint-free cloth
moistened with isopropyl alcohol), wipe the feed rollers on both sides of the open hatch.
Wipe the rollers from the top down, rotating the rollers a full 360 degrees to ensure that you wipe
the complete surface.
CAUTION: Wait two minutes for the feed rollers to dry before loading documents into the
document feeder.
6. Close the roller cover doors on the front and rear of the open document feeder hatch.
7. Close the document feeder hatch, and then reconnect power to the product.
8. Press the Power ( ) button to turn on the product.
About scan profiles
If you have scan tasks that you perform frequently, you can use a scan profile to create and save a set
of scan settings. This lets you quickly use the same settings each time you perform a specific scan task.
You can also map a scan profile to a scanner button.
Once a profile is created, you can use the HP Smart Document Scan Software to:
● Select a profile and start a scan
● Edit a profile
● Delete a profile
● Create a new profile based on an existing profile
TIP: HP Smart Document Scan Software comes with default profiles to get you started.
If you want to use your profiles from the Scan Simplex ( ) and Scan Duplex ( ) buttons, use the
HP Scanner Tools Utility to:
● Add profiles to the scanner LCD's profile list
● Reorder profiles in the scanner LCD's profile list
● Delete profiles from the scanner LCD's profile list
6 Chapter 1 Product basics ENWW