HP Scanjet Enterprise Flow 7000 s2 Sheet-feed Scanner - Manual (Page 31)

4. Dry the scanning strips with a dry, soft, lint-free cloth, making sure to wipe the small strips of gray
reflective material on each strip.
5. Close the document feeder hatch, reconnect the USB cable and power supply to the scanner, and
then press the Power ( ) button to turn on the scanner.
Clean the paper path
If scanned images have streaks or scratches, use an HP paper path cleaning cloth to clean the paper
path.
NOTE: If you experience repeated document jams, clean the rollers.
To clean the paper path, follow these steps:
1. Open the sealed HP paper path cleaning cloth container, starting at the notch. Take care not to
tear the cleaning cloth.
2. Remove the cleaning cloth and unfold it.
3. Place the unfolded cloth into the document feeder.
4. Press the Tools ( ) button to open the HP Scanner Tools Utility, and then click the Maintenance
tab.
5. Under Clean Paper Path, click Clean to feed the cloth through the scanner.
CAUTION: Wait two minutes for the components to dry before proceeding to the next step.
6. Place up to five pages of printed paper in the scanner. Scan and view the results.
ENWW Clean the paper path 25