Solve image-quality problems, Image defect examples, Light print or faded – HP LASERJET PRO P1102w User Manual

Page 107: Toner specks, Light print or faded toner specks

Advertising
background image

Solve image-quality problems

You can prevent most print-quality problems by following these guidelines.

Use paper that meets HP specifications. See

Paper and print media on page 33

.

Clean the product as necessary. See

Clean the product on page 71

.

Image defect examples

This section provides information about identifying and correcting print defects.

NOTE:

If these steps do not correct the problem, contact an HP-authorized dealer or service

representative.

Light print or faded

Redistribute the toner to extend the life. See

Redistribute

toner on page 61

.

The print cartridge is nearing end of life. Install a new
genuine HP print cartridge.

The media might not meet Hewlett-Packard's media
specifications (for example, the media is too moist or too
rough).

If the whole page is light, the print density adjustment is
too light or EconoMode might be turned on. Adjust the
print density, and disable EconoMode in the product
Properties.

Toner specks

The media might not meet Hewlett-Packard's media
specifications (for example, the media is too moist or too
rough).

The product might need to be cleaned.

The print cartridge might be defective. Install a new
genuine HP print cartridge.

ENWW

Solve image-quality problems

93

Advertising
This manual is related to the following products: