HP LaserJet P2015 - Manual (Page 22)

2. Connect the Ethernet cable to the Ethernet port on the back of the printer.
3. Verify that one of the network lights (10 or 100) is illuminated on the network port located on the
back of the printer.
4. Print a Network Configuration page: When the printer is in the Ready state, press and hold the
Go button for 5 seconds. The Network Configuration page automatically prints with the
Configuration page.
NOTE To resolve network connection problems, see Network setup problem solving .
Install the printer software for the network printer
To use the printer on the network, install the printer software on a computer that is connected to the
network. See
Software for Windows or Software for Macintosh for information about installing the printer
software.
12 Chapter 3 Product software ENWW