HP LaserJet P2015 - Manual (Page 25)

Software for Macintosh
The following sections describe the Macintosh software that is available for the HP LaserJet P2015
Series printers.
Macintosh printer drivers
A printer driver is the software component that provides access to printer features and provides the
means for the computer to communicate with the printer.
Install the Macintosh printer driver
This section explains how to install the printing system software for Macintosh OS X V10.2.8, V10.3.9
and V10.4.3.
NOTE USB queues are created automatically when the printer is attached to the computer.
However, the queue will use a generic PPD if the installer has not been run before the USB cable
is connected. To change the queue PPD, open the Print Center or Printer Setup Utility, select
the correct printer queue, and then click Show Info to open the Printer Info dialog box. In the
pop-up menu, select Printer Model, and then, in the pop-up menu in which Generic is selected,
select the correct PPD for the printer.
Use the following procedure to install the Macintosh printer driver:
1. Insert the printer CD into the CD-ROM drive and run the installer.
2. Double-click the CD icon on the desktop
3. Double-click the Installer icon.
4. Follow the instructions on the computer screen.
5. Print a test page or a page from any software program to make sure that the printer software is
correctly installed.
If installation fails, reinstall the software. If this fails, see the Late-Breaking Information section of the
Install Notes. The Install Notes are located on the printer CD or at the support Web site (see
How to
contact HP for the Web address).
Configure the Macintosh printer driver
Use one of the following methods to open the Macintosh printer driver from your computer:
Operating System To change the settings for all
print jobs until the software
program is closed To change the print job default
settings (for example, turn on
Print on Both Sides by default) To change the configuration
settings (for example, add a
tray or enable/disable Manual
Duplexing)
Macintosh OS X V10
.2.8, V10.3.9, and
V10.4.3 1. On the File menu, click
Print.
2. Change the settings that
you want on the various
pop-up menus.
1. On the File menu, click
Print.
2. Change the settings that
you want on the various
pop-up menus.
3. On the Presets pop-up
menu, click Save as and
type a name for the preset.
1. Open Printer Setup Utility
by selecting the hard drive,
clicking Applications,
clicking Utilities, then
double-clicking Printer
Setup Utility.
2. Click the print queue.
ENWW Software for Macintosh 15