HP LaserJet P2015 - Manual (Page 96)

HP postscript level 3 emulation errors
The following situations are HP postscript level 3 emulation language-specific and can occur when
several printer languages are being used.
NOTE To receive a printed or screen displayed message when HP postscript level 3 emulation
errors occur, open the Print Options dialog box and click the desired selection next to the PS
Errors section. You can also access this from the embedded Web server.
Table 7-5 HP postscript level 3 emulation errors
Symptom Possible cause Solution
The job prints in Courier (the printer's
default typeface) instead of the typeface
you requested. The requested typeface is not
downloaded. A personality switch may
have been performed to print a PCL job
just before the HP postscript level 3
emulation printing job was received. Download the desired font and send the
print job again. Verify the type and
location of the font. Download to printer
if applicable. Check with the software
documentation.
A legal page prints with clipped margins. Print job too complex. You may need to print your job at
600 dots per inch, reduce the complexity
of the page, or install more memory.
An HP postscript level 3 emulation error
page prints. Print job may not be HP postscript level
3 emulation. Make sure the print job is an HP
postscript level 3 emulation job. Check to
see whether the software application
expected a setup or HP postscript level
3 emulation header file to be sent to the
printer.
Limit Check Error Print job is too complex. You may need to print your job at
600 dots per inch, reduce the complexity
of the page, or install more memory.
VM Error Font Error Select unlimited downloadable fonts
from printer driver.
Range Check Font Error Select unlimited downloadable fonts
from printer driver.
86 Chapter 7 Problem solving ENWW