HP DesignJet 500 - Manual (Page 154)

Media & Ink Introduction Front-Panel Other Index Solutions
The Front-Panel Setup Menus Consumable Menus Internal Prints Navigation
Message
Descriptions
Printer
Options
Front-Panel Messages
Status Description Procedure
A factory media can not
be deleted. You cannot delete this
media because it is one of
the HP supported types of
media that was added at the
factory. See Media Profile
Downloading for details of the
down loading media profiles
procedure.
Calibrate error The calibration the printer
was performing has failed. Note down the calibration error
code which comes with this
message and contact your HP
representative.
Calibration cancelled The printer was performing
a calibration and you
pressed the cancel key on
the front-panel. If the printer was performing a
calibration to correct an
internal error, the correct
functioning of the printer may
be affected.
Calibration Error
XXXX
Press Enter to Continue The printer was calibrating
and failed to complete the
calibration. The front-panel
shows an error code,
represented here by XXXX. 1. Press the Enter to continue.
you can continue to print, but if
you have problems contact
your HP representative.