Printhead status messages, Status numbers, Printhead status – HP DesignJet 500 User Manual
Page 166: Messages
Advertising
Printhead Status Messages
Status
Numbers
XX ranges
1
from 00 - 55
Printhead Message
Description
Procedure
XX02 Reseat
XX06 Reseat
XX08 Reseat
The Printhead may only be
badly seated. This means there
is a bad electrical connection
between the printhead and the
printer carriage.
Try these steps below. If the message
returns to OK after performing the first
step, do not continue.
1. Remove the printhead and insert
the printhead again.
2. Remove the printhead and clean
the interconnect, refer to
3. Replace the printhead.
XX10 Reseat
There is an electrical failure
Advertising