Printhead cleaner error messages – HP DesignJet 500 User Manual
Page 173
Advertising
Printhead Cleaner Error Messages
Status Numbers
XX ranges from
A0 - B5
Printhead Head Cleaner
Message Description
Procedure
XX03 Replace
The printhead cleaner installed is
not recognized by the printer.
This may mean that the line
sensor is dirty, perform the Lens
Replacement procedure.
Ensure that you have replaced
the printhead cleaner together
with the printhead.
Ensure that all the printhead
cleaners installed are genuine
HP No. 81/83
XX05 Replace
The printhead detects that the
printhead cleaner does not
match the rest of the ink system
already installed.
XX06 Replace
The printer detects an incorrect
printhead cleaner
Advertising