HP DesignJet 500 - Manual (Page 236)

Media & Ink Introduction Front-Panel Other Index Solutions
Printer
Options
Maintaining the Printer Specifications Ordering Accessories Online Help Glossary
Storing and Moving Your
Printer
If you need to move your printer or store it for an
extended period of time, you need to prepare your
printer properly to avoid possible damage to the printer.
To prepare your printer, follow the instructions given
below:
NOTE: It is important that you do not remove the Ink
Cartridges, Printheads and Printhead Cleaners before
moving or storing the printer.
1. Make sure:
 No media is loaded
 The printheads are stored in the service station
 The front-panel displays: ‘Ready’
2. Switch the power off at the power isolator switch at
the back of the printer.
3. Disconnect any cables connected to the printer.
4. Repack the printer in its’ original packaging. Refer
Repacking Instructions booklet.
5. If you have to move your printer you will need the
original packaging. If necessary you can order a
kit of the packaging materials. Contact your HP
representative and they will supply it to you. If
necessary they will repackage the printer for you.