HP DesignJet 500 - Manual (Page 9)

Printer
Options
Media & Ink Front-Panel Other Index Solutions
The User’s Reference Guide Introduction To Your Printer Printer with Take-Up Reel Printer with Bin Assembly
Introduction
Media
The following paper types are supported for your
printer and the HP No. 81/HP No. 83 Ink Supplies:
 HP Coated Paper
 HP Heavyweight Coated Paper
 HP Banners with Tyvek™
 Photo Imaging Gloss
 Photo Imaging Satin
 HP Paper Based Semi-Gloss
 HP Studio Canvas
 HP Colorfast Adhesive Vinyl
 Colorlucent Backlit UV
 HP Satin Poster Paper
For detailed information on Hewlett-Packard Media,
see
Physical Characteristics of Media Types .
HP Designjet WebAccess
WebAccess reports in detail on the status and history
of your printer, and in some cases allows you to change
the printer status.
To Use WebAccess
Start your Web browser and give the address of your
printer, as follows:
http://<address>/
where <address> is the IP address of the printer. You
can find out the IP address of the printer from the front-
panel, as follows:
1. From the Printer setup options, select IO setup.
2. From IO setup, select Card ID.
3. Under Card ID, find the line starting with IP=. The
remainder of that line is the IP address of the printer.
As an alternative to the IP address, you may give the
DNS name of the printer. However, you will not be able
to find the DNS name in the front-panel; ask your
network administrator if you would like to use it.
Each status display is static: it does not automatically
update itself as time goes by. To update it,
click on the Update icon. The following
facilities are provided by the menu on the left
side of the HP Designjet WebAccess
window.