HP Officejet 6100 - Manual (Page 33)

6. If your network uses proxy settings when connecting to the Internet, enter these
settings.
7. Follow the instructions on the Web Services information sheet to finish the setup.
Mac OS X
▲
To set up and manage Web Services in Mac OS X, you can use the printer’s
embedded web server (EWS). For more information, see Set up HP ePrint using
the embedded web server.
Set up HP ePrint using the printer’s control panel
The printer’s control panel provides an easy way to set up and manage HP ePrint.
To set up HP ePrint, complete the following steps:
1.
On the printer control panel, press the (HP ePrint) button. The printer prints
the HP ePrint Setup page.
2. Follow the instructions on the page to set up HP ePrint.
Set up HP ePrint using the embedded web server
You can use the printer’s embedded web server (EWS) to set up and manage HP
ePrint.
To set up HP ePrint, complete the following steps:
1.
Open the EWS. For more information, see Embedded web server.
2. On the Web Services tab, click Setup in the Web Services Settings section.
3. Click Accept Terms of Use and Enable Web Services, and then click Next.
4. Click Yes to allow the printer to automatically check for and install product
updates.
5. If your network uses proxy settings when connecting to the Internet, enter these
settings.
6. Follow the instructions on the Web Services information sheet to finish the setup.
Use HP ePrint
HP ePrint allows you to print to your HP ePrint-enabled printer anytime, from any
location.
To use HP ePrint, make sure to have the following:
•
An Internet- and email-capable computer or mobile device
• An HP ePrint-capable printer on which Web Services has been enabled
TIP: For more information about managing and configuring HP ePrint settings and
to learn about the latest features, visit ePrintCenter (www.eprintcenter.com).
Use HP ePrint 29