Logging in to spocc, Changing the sp password by using spocc, Spmaint overview – HP 3PAR Service Processors User Manual
Page 10
Logging In to SPOCC
SPOCC is accessed through a management workstation, which is a machine that has been defined
in the SP’s public firewall rules. One or more management workstations are typically defined as
part of the installation and setup of the storage system and SP, as described in the
installation/deinstallation guide for your version of the HP 3PAR StoreServ Storage system.
To log in to SPOCC:
1.
Enter the IP address or hostname of the SP in the web browser, and then press Enter.
2.
Enter your user ID and password, and then click OK.
NOTE:
For a current list of supported browsers for SPOCC, see the Single Point of Connectivity
Knowledge for HP Storage Products (SPOCK), located at
.
Changing the SP Password by Using SPOCC
To protect the Service Processor against unauthorized access, HP recommends that you change
the default passwords and maintain the new passwords so that they are available for support
personnel.
To change the Service Processor password:
1.
Log in to SPOCC.
2.
In the left navigation pane, click SPmaint.
3.
Under Service Processor - SP Maintenance, click SP Control/Status.
4.
Under Service Processor - SP Control Menu, click SP User Access Control.
5.
Under Service Processor - SP User Access Control Menu, click Change User Password.
6.
In the Select User list, select the user name whose password you want to change.
7.
In the New Password field, enter the new password.
NOTE:
A valid password is between 7 and 32 characters long and uses only alphanumeric
characters and the following special characters:
•
Period (.)
•
Forward slash (/)
•
Plus sign (+)
•
Equals sign (=)
•
Hyphen (-)
8.
In the Confirm Password field, enter the new password again.
9.
Click Change Password.
SPMAINT Overview
The SPMAINT utility is an interface for the support (configuration, maintenance, and update) of
both the storage system and its SP. Use SPMAINT as a backup method for accessing the SP; SPOCC
is the preferred access method. In this guide, the features of the SPMAINT utility are divided into
the following major categories:
•
Control of the SP (for more information, see
“SP Control/Status Functions” (page 14)
)
•
Network configuration (for more information, see
“Network Configuration” (page 21)
)
10
Overview