Warning messages, Error messages, Critical error messages – HP Officejet J4680 User Manual

Page 21: Change device settings

Advertising
background image

Warning messages

Warning messages inform you of events that require your attention, but they do not
prevent the device from operating. An example of a warning message is Low On Ink.

Error messages

Error messages communicate that some action must be performed, such as adding
media or clearing a media jam. These messages are usually accompanied by a
blinking red Attention light. Take the appropriate action to continue printing.
If the error message shows an error code, press the Power button to turn off the
device, and then turn it on again. In most situations, this action solves the problem. If
the message persists, your device might need service.

Critical error messages

Critical error messages inform you of a device failure. Some of these messages can
be cleared by pressing the Power button to turn off the device, and then turning it on
again. If a critical error persists, service is required. For more information, see

Support

and warranty

.

Change device settings

You can change the device settings from these places:

From the device control panel.

From the HP Solution Center (Windows) or HP Device Manager (Mac OS). For
more information, see

Use the HP photo and imaging software

.

NOTE: When you are configuring settings in HP Solution Center or in the HP
Device Manager, you cannot see the settings that have been configured from the
device control panel.

To change settings from the device control panel
1.
At the device control panel, press the left or right arrow keys to navigate to the

function you are using (for example, Fax). Press OK to select that function.

2. To reach the option that you want to change, use one of the following methods:

Press a control-panel button, and then use the left or right arrow keys to adjust
the value.

Select the option from the menu on the control-panel display.

3. Select the value that you want, and then press OK.

To change settings from the HP Solution Center (Windows)
▲ See

Use the HP photo and imaging software

.

Change device settings

17

Advertising
This manual is related to the following products: