Set up backup fax – HP Officejet J4680 User Manual

Page 53

Advertising
background image

You can receive faxes manually from a phone that is:

Directly connected to the device (on the 2-EXT port)

On the same phone line, but not directly connected to the device

To receive a fax manually
1.
Make sure the device is turned on and you have paper loaded in the main tray.
2. Remove any originals from the document feeder tray.
3. Set the Rings to Answer setting to a high number to allow you to answer the

incoming call before the device answers. Or, turn off the Auto Answer setting so
that the device does not automatically answer incoming calls.

4. If you are currently on the phone with the sender, instruct the sender to press Start

on their fax machine.

5. When you hear fax tones from a sending fax machine, do the following:

a. Press the left arrow or the right arrow to select Black-and-white fax or

Color fax.

b. Press Start.
c. After the device begins to receive the fax, you can hang up the phone or

remain on the line. The phone line is silent during fax transmission.

Set up backup fax

Depending on your preference and security requirements, you can set up the device to
store all the faxes it receives, only the faxes it receives while the device is in an error
condition, or none of the faxes it receives.
The following Backup fax modes are available:

On

The default setting. When Backup fax is On, the device stores all
received faxes in memory. This enables you to reprint up to eight of the
most recently printed faxes if they are still saved in memory.

NOTE: When device memory is low, it overwrites the oldest, printed
faxes as it receives new faxes. If the memory becomes full of unprinted
faxes, the device stops answering incoming fax calls.

NOTE: If you receive a fax that is too large, such as a very detailed
color photo, it might not be stored in memory due to memory limitations.

On Error Only

Causes the device to store faxes in memory only if an error condition
exists that prevents the device from printing the faxes (for example, if the
device runs out of paper). The device continues to store incoming faxes
as long as there is memory available. (If the memory becomes full, the
device stops answering incoming fax calls.) When the error condition is
resolved, the faxes stored in memory print automatically, and then they
are deleted from memory.

Off

Faxes are never stored in memory. For example, you might want to turn
off Backup fax for security purposes. If an error condition occurs that
prevents the device from printing (for example, the device runs out of
paper), the device stops answering incoming fax calls.

Receive a fax

49

Advertising
This manual is related to the following products: