Scan defects are apparent – HP Officejet J4680 User Manual

Page 136

Advertising
background image

The scanned image shows blots, lines, vertical white stripes, or other defects

If the scanner glass is dirty, the image produced does not have optimum clarity.
See

Clean the device

for cleaning instructions.

The defects might be on the original and not a result of the scanning process.

Graphics look different from the original
The graphics settings might not be suitable for the type of scan job that you are
performing. Try changing the graphics settings.
Take steps to improve the scan quality

Use high-quality originals.

Place the media correctly. If the media is placed incorrectly on the scanner glass, it
might skew, which causes unclear images. For more information, see

Load originals

.

Adjust the software settings according to how you plan to use the scanned page.

Use or make a carrier sheet to protect your originals.

Clean the scanner glass. See

Clean the scanner glass

for more information.

Scan defects are apparent

Blank pages
Make sure that the original document is placed correctly. Place the original
document face down on the flatbed scanner with the top-left corner of the
document located in the lower-right corner of the scanner glass.

Too light or dark

Try adjusting the settings. Be sure to use the correct resolution and color
settings.

The original image might be very light or dark or might be printed on colored
paper.

Unwanted lines
Ink, glue, correction fluid, or an unwanted substance might be on the scanner
glass. Try cleaning the scanner glass. See

Clean the device

for more information.

Black dots or streaks

Ink, glue, correction fluid, or an unwanted substance might be on the scanner
glass, the scanner glass might be dirty or scratched, or the lid backing might be
dirty. Try cleaning the scanner glass and lid backing. See

Clean the device

for

more information. If cleaning does not correct the problem, the scanner glass
or lid backing might need to be replaced.

The defects might be on the original and not a result of the scanning process.

Unclear text
Try adjusting the settings. Make sure that the resolution and color settings are
correct.

Size is reduced
The HP software settings might be set to reduce the scanned image. See the
product software Help for more information about changing the settings.

Chapter 8

132

Maintain and troubleshoot

Advertising
This manual is related to the following products: