Set the fax error correction mode – HP Officejet J4680 User Manual

Page 61

Advertising
background image

monitors the line. If the device detects fax tones, it receives the fax. If the call is a
voice call, the answering machine records the incoming message.

To set the number of rings before answering via the device control panel
1.
Press Setup.
2. Press the right arrow to select Fax Settings, and then press OK.
3. Press the right arrow to select Answer Options, and then press OK.
4. Press the right arrow to select Rings to Answer, and then press OK.
5. Enter the appropriate number of rings by using the keypad, or press the left arrow

or the right arrow to change the number of rings.

6. Press OK to accept the setting.

Change the answer ring pattern for distinctive ring

Many phone companies offer a distinctive ring feature that allows you to have several
phone numbers on one phone line. When you subscribe to this service, each number
is assigned a different ring pattern. You can set up the device to answer incoming calls
that have a specific ring pattern.
If you connect the device to a line with distinctive ring, have your telephone company
assign one ring pattern to voice calls and another ring pattern to fax calls. HP
recommends that you request double or triple rings for a fax number. When the device
detects the specified ring pattern, it answers the call and receives the fax.
If you do not have a distinctive ring service, use the default ring pattern, which is All
Rings
.

NOTE: The HP fax cannot receive faxes when the main phone number is off the
hook.

To change the answer ring pattern for distinctive ring via the device control panel
1.
Verify that the device is set to answer fax calls automatically.
2. Press Setup.
3. Press the right arrow to select Basic Settings, and then press OK.
4. Press the right arrow to select Ring Pattern, and then press OK.

When the phone rings with the ring pattern assigned to your fax line, the device
answers the call and receives the fax.

Set the fax error correction mode

Typically, the device monitors the signals on the phone line while it is sending or
receiving a fax. If it detects an error signal during the transmission and the error-
correction setting is on, the device can request that a portion of the fax be resent.
Turn off error correction only if you are having trouble sending or receiving a fax, and
you want to accept the errors in the transmission. Turning off the setting might be
useful when you are trying to send a fax to another country/region or receive a fax
from another country/region, or if you are using a satellite phone connection.

Change fax settings

57

Advertising
This manual is related to the following products: