GE JP656DDBB User Manual

Jp656dd, 36" built-in clean design electric cooktop

Advertising
background image

* ADA qualified based

on Uniform Federal

Accessibility Standards

For answers to your Monogram

®

or GE appliance

questions, visit our website at geappliances.com
or call GE Answer Center

®

service, 800.626.2000.

*

321369

Listed by

Underwriters

Laboratories

Important: Requires a 5” free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a 15”
minimum from cooktop to adjacent overhead
cabinets. Units are furnished with a 48” flexible
armored cable.
Note: 36” Ribbon cooktops are approved for use
over select GE 30” Single Wall Ovens and Warming
Drawers. Refer to cooktop and wall oven/warming
drawer installation instructions packed with
product for current dimensional data. If installed
with a GE Telescopic Downdraft System, consult
both the cooktop and downdraft installation
instructions packed with product before installing.
Cooktop gas/electric supply may need to be
re-routed to install downdraft. The countertop
cutout requires 23-1/2” minimum flat countertop
surface and 25” minimum total countertop depth.
In addition, other clearances to front edge of the
countertop must be considered. Consult cabinet
and countertop manufacturer’s specs
for flush mount installation prior to install.

Before installing, consult installation

instructions packed with product for

current dimensional data.

R

Dimensions and Installation Information (in inches)

JP656DD

GE

®

36" Built-In Clean Design Electric Cooktop

KW Rating

240V 8.7
208V 6.5

Breaker Size

240V 40 Amps

208V 40 Amps

Specification Created 10/12

Note: Check local codes for

required breaker size

Advertising