GE JK5500SFSS - Manual

Listed by
Underwriters
Laboratories
For answers to your Monogram ® or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center
® service, 800.626.2000.
Note: Cabinets installed adjacent to wall ovens
must have an adhesion spec of at least a 194°F
temperature rating.
Door handle protrudes 3" from door face. Cabinets
and drawers on adjacent 45° and 90° walls should
be placed to avoid interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
Dimensions and Installation Information (in inches)
Specification Created 2/13
320365
JK5500SF
GE ® 27" Built-In Double Convection Wall Oven
PK7500
JK5500
JK3500
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Overall depth with handle
27"
Overall depth without handle 23-5/8"
E – Overall height with trim 52-15/16"
F – Overall width 29-3/4"
23" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
8-3/4" MAX.
44" to
bottom of
junction box
22"
D
F
E
Conduit
40"
Junction box
location
CL
Suitable
bracing
to support
runners
(must support 375 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the floor
13-1/4"
Cutout height
49-11/16" MIN.
50-1/8" MAX.
PK7500
JK5500
JK3500
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Overall depth with handle
27"
Overall depth without handle 23-5/8"
E – Overall height with trim 52-15/16"
F – Overall width 29-3/4"
23" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
8-3/4" MAX.
44" to
bottom of
junction box
22"
D
F
E
Conduit
40"
Junction box
location
CL
Suitable
bracing
to support
runners
(must support 375 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the floor
13-1/4"
Cutout height
49-11/16" MIN.
50-1/8" MAX.
PK7500
JK5500
JK3500
Cabinet 30"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 3/4"
C – Overlap of oven at bottom of cutout 1-1/4"
Oven
D – Overall depth with handle
27"
Overall depth without handle 23-5/8"
E – Overall height with trim 52-15/16"
F – Overall width 29-3/4"
23" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
8-3/4" MAX.
44" to
bottom of
junction box
22"
D
F
E
Conduit
40"
Junction box
location
CL
Suitable
bracing
to support
runners
(must support 375 lbs.)
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the floor
13-1/4"
Cutout height
49-11/16" MIN.
50-1/8" MAX.
23" minimum
door opening
allowance
Cutout depth
23-1/2" MIN
8-3/4" MAX.
44" to
bottom of
junction box
22"
D
F
E
Conduit
40"
Junction box
location
CL
Suitable
bracing
to support
runners
(must support 375 lbs.)
Cabinet 27"
A – Overlap of oven at top of cutout 1"
B – Overlap of oven over side of edges of cutout 1"
C – Overlap of oven at bottom of cutout 1"
Oven
D – Overall depth with handle
26-23/32"
E – Overall height with trim 52-1/8"
F – Overall width 26-23/32"
JK5500
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
B
27''
A
C
Cutout width
25" MIN.
25-1/4" MAX.
Recommended
minimum
cutout location
from the floor
13-1/4"
Cutout height
49-11/16" MIN.
50-1/8" MAX.
KW Rating
240V 7.2
208V 5.4
Breaker Size
240V 30 Amps
208V 30 Amps