GE PP944TTWW User Manual

Pp944dt/tt, Ge profile, Series 30" built-in cleandesign electric cooktop

Advertising
background image

For answers to your Monogram

®

or GE

®

appliance

questions, visit our website at geappliances.com
or call GE Answer Center

®

service, 800.626.2000.

220547

Listed by

Underwriters

Laboratories

Note: Check local codes for required breaker size

Important: Requires a 5” free area between
the bottom of the cooktop to any combustible
material, i.e., shelving. Free area not required
when installing wall oven underneath cooktop.
Refer to installation instructions. Requires a
15” minimum from cooktop to adjacent
overhead cabinets. Units are furnished with
a 48” flexible armored cable.

Note: 30” Ribbon cooktops are approved for use over select GE 30” Single
Wall Ovens and Warming Drawers. All 30" ribbon cooktops can be installed
over 27" wall ovens and warming drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile

Telescopic Downdraft System,

consult both the cooktop and downdraft installation instructions packed
with product before installing. Cooktop gas/electric supply may need to be
re-routed to install downdraft. The countertop must be at least 26" deep with
a flat surface area of 23-1/2" or more, front to back. In addition, other
clearances to the front edge of the countertop must be considered.
Consult cabinet and countertop manufacturer’s specs for flush mount
installation prior to install.

Before installing, consult installation

instructions packed with product for current dimensional data.

KW Rating

240V

8.5

208V

6.4

Breaker Size

240V

40 Amps

208V

30 Amps

Dimensions and Installation Information (in inches)

Specification Revised 3/13

PP944DT/TT

GE Profile

Series 30" Built-In CleanDesign Electric Cooktop

Advertising
This manual is related to the following products: