Adapting microwave blower for recirculation, Adapting microwave blower for recirculation , 21, Installation instructions – GE JVM6175DFWW User Manual
Page 20: Adapting microwave blower for recirculation c3
AFTER: Fan Blade
Openings Facing
Forward
4
20
Roll the blower unit 90° so that fan blade openings
are facing toward the front of the microwave.
Roll
NOTE: Make sure wires remain routed in the
grooves of the motor frame.
Installation Instructions
BEFORE: Fan Blade
Openings Facing Up
ADAPTING MICROWAVE
BLOWER FOR RECIRCULATION
C3.
1
2 Open the blower door by lifting it up at the back
of the microwave oven. Remove and save the
blower retaining screw.
3 Carefully pull out the blower unit. The wires
will extend far enough to allow you to adjust the
blower unit.
Blower Retaining
Screw
Remove and save the screw that holds the blower
motor door closed on the back and the blower
retaining screw on the top of the door.
Back of
Microwave
Oven
Blower Motor
Door Retaining
Screw
Blower
Blower
Retaining
Screw