GE PGP989SNSS - Manual

Dimensions and Installation Information
Listed by
Underwriters
Laboratories
PGP989SN
GE Profile ™ Series 30" Downdraft Gas Cooktop
For answers to your Monogram ® or GE ® appliance
questions, visit our website at geappliances.com
or call GE Answer Center
® service, 800.626.2000.
22 7 ⁄
16 ʺ
(22 9 ⁄
16 ʺ SS)
20 1 ⁄ 2 ʺ
22ʺ
29 7 ⁄ 8 ʺ
(30ʺ SS)
2 3 ⁄
16 ʺ
(2 1 ⁄ 4 ʺ SS)
28 3 ⁄ 4 ʺ
25
1-7/8"
MIN. Required*
20-5/8
Cut-out Dimensions (in inches)
28-7/8
*U.L. Requirement.
Note: A 5" minimum spacing to adjacent side wall is required
Specification Revised 3/13
230285
*Note: A 5" minimum spacing to adjacent side wall is required
Dimension and installation information are shown in inches.
Wall Installation: Wall installations require 25”
countertop depth. When cabinet is flush against
the wall, the fan housing can be rotated to the
horizontal position for direct venting through
rear wall. Make a countertop cutout in the
range cabinet according to unit dimensions
and installation type. Duct hole is positioned in
back of cabinet for through-the-wall ducting.
Requires special offset adapter JXRW89.
Peninsula or Island Installation: For peninsula/
islands a minimum 26” countertop depth is suggested.
Blower should be in vertical position. Island or
peninsula cabinets may require adjustment in cutout
depth and/or location within the width dimensions.
Duct hole is positioned in bottom of cabinet for island
or peninsula installation.
Slab Installation: For peninsula or island installation
and rear wall ducting,
6” PVC duct or locally
approved piping should be used if installing under
a poured concrete slab.
Installation Information: Before installing, consult
installation instructions, packed with product, for
current dimensional data.
Note: These cooktops are approved for indoor use only.
20
9
4
10-1/2
16
C L
Cabinet Dimensions (in inches)
22 7 ⁄ 16 ʺ
(22 9 ⁄ 16 ʺ SS)
20 1 ⁄ 2 ʺ
22ʺ
29 7 ⁄ 8 ʺ
(30ʺ SS)
2 3 ⁄ 16 ʺ
(2 1 ⁄ 4 ʺ SS)
28 3 ⁄ 4 ʺ
25
1-7/8"
MIN. Required*
20-5/8
Cut-out Dimensions (in inches)
28-7/8
*U.L. Requirement.
Note: A 5" minimum spacing to adjacent side wall is required