AMX UDM-0102 - Manual (Page 20)

UDM-0102 Wiring and Connections
8 UDM-0102 and UDM-RX02 Operation/Reference Guide
UDM Port (RJ45)
The RJ45 port on the front panel of the UDM-0102 labelled “UDM” provides connectivity to a UDM-
RX02 Multi-Format Receiver. This is a standard RJ45 connector, and the UDM-RX02 can be connected
via either Cat5, Cat5e or Cat6 cabling.
UDM Port Pinouts
The following table describes the pinout configuration of the UDM port:
UDM Port Transmission Details
The following table provides transmission details for the UDM port:
An incorrectly terminated cable will result in the following scenarios:
UDM Port Pinouts
Pair Color RJ45 Pin Polarity Endeleo Function
1
White / Blue 5 -
Green
Blue 4 +
2
White / Orange 1 +
Red
Orange 2 -
3
White / Green 3 +
Blue
Green 6 -
4
White / Brown 7 +
Bi-Directional Control, Digital Audio, Phantom Power
Brown 8 -, Gnd
Transmission on UDM Port
Pair Pin UDM (CVBS) UDM (SVideo) UDM (YPbPr) UDM (RGB)
1 1 CVBS + Luma + Y+ Red +
1 2 CVBS - Luma - Y- Red -
2 3 Chroma + Pr+ Blue+
3 4 Pb+ Green +
3 5 Pb- Green -
2 6 Chroma - Pr- Blue -
4 7 Power, Data, Audio Power, Data, Audio Power, Data, Audio Power, Data, Audio
4 8 Power, Data, Audio Power, Data, Audio Power, Data, Audio Power, Data, Audio
Incorrectly terminated cable results
Pair Composite
Video
SVideo Component
Video
RGBHV
Video
User Port
LINK LED
1 No Video 1 No Luma No Y No RED LIT
2 No Video 3 No Chroma No Pr No BLUE LIT
3 No Video 2 NONE No Pb NONE No GREEN
NONE LIT NONE
4