Clinton Electronics CE-ACW User Manual

Pendant mount cap installation guide

Advertising
background image

Pendant Mount Cap Installation Guide

CE-ACW (White) & CE-ACB (Black)

Included Items:

• Pendant Cap x 1

• Mounting Screws x 3

• Conduit Screw Connector x 1

• Instructions x 1

Required Items:

• ¾”Conduit Pipe x 1

• Philips Head Screwdriver x 1

• Clinton Dome Camera x 1

Installing the Pendant Mount Cap

1. Install the Camera Mounting Plate.

Use the 3 supplied screws to install the camera mounting

plate to the pendant cap as shown below.

2. Install Pendant Mount onto location.

Screw the pendant mount cap onto a suitable conduit

pipe that has ¾” NPT threads or use the included

conduit screw connector and tighten the top screw to

secure the pendant cap to the conduit pipe.

3. Connect the Cables

Feed the power and video cables through the pendant

mount cap and connect the power and video cables.

4. Secure the Camera to Pendant Cap

Secure the camera to the pendant cap by matching up the

three mounting posts on the camera mounting plate to

the base of the camera and turn the camera clockwise to

lock into place.

5. Adjust Camera Position and Test

Remove the dome cover and adjust the camera to the

desired position and test. See camera instruction manual

for detailed camera adjustment and settings.

6. Replace the Dome Cover.

Replace the dome cover by slightly turning the dome

clockwise until it locks into place.

v.04.08.09

CLINTON Electronics
6701 Clinton Road
Loves Park, IL 61111

1.800.447.3306 Sales
1.800.549.6396 Support
1.800.633.8712 Fax

www.clintonelectronics.com

Conduit Screw Connector

¾” Conduit Pipe

Pendant Cap

Camera Mounting Plate

Mounting Screws

Camera

Dome Cover

Advertising
This manual is related to the following products: