CMP T3CDSPB User Manual
Cable gland types, Cable gland types t3cds & t3cdspb t3cds & t3cdspb
INSTALLATION INSTRUCTIONS FOR
CMP CABLE GLAND TYPES
T3CDS & T3CDSPB
CABLE GLAND FOR USE WITH SINGLE WIRE ARMOUR (SWA), WIRE BRAID, STRIP, AND TAPE ARMOUR
(T3CDSPB VERSION CAN ALSO BE USED ON CABLE WITH A LEAD SHEATH).
FOR USE IN HAZARDOUS LOCATIONS.
INCORPORATING EC DECLARATION OF CONFORMITY TO DIRECTIVE 94/9/EC
CMP TRITON
TM
CDS
TM
DELUGE PROOF CABLE GLAND FEATURING
COMPENSATING DISPLACEMENT SEAL SYSTEM.
CM
P
Do
cu
m
en
tN
o.
FI
40
8
Is
su
e
7
01
/1
3
0518
Glasshouse Street • St. Peters • Newcastle upon Tyne • NE6 1BS
Tel: +44 191 265 7411 • Fax: +44 191 265 0581
E-Mail: [email protected] • Web: www.cmp-products.com
Notified Body: Sira Certification Service, Rake Lane, Chester CH4 9JN, England.
I, The undersigned, hereby declare that the equipment referred to herein conforms to the requirements of the ATEX Directive 94/9/EC and the
following standards:-
EN60079-0:2006, EN60079-1:2007, EN60079-7:2007, EN60079-15:2005, BS 6121:1989, EN50262:1989 (Amd 2001), EN61241-0:2004,
EN61241-1:2004
Dr Geof Mood - Technical Director - (Authorised Person)
DUBAI
• HOUSTON • NEWCASTLE • SINGAPORE • SHANGHAI • PUSAN • PERTH
www.cmp-products.com
Cable Gland Selection Table
Logo’s shown for illustration purposes only. Please check certification for details
**
Insert “PB” into the code for T3CDSPB glands e.g. 20T3CDSPB1RA
*
For IP67 & IP68 requirements the Overall Cable Diameter (minimum value) shown above should be increased by 1.0 mm to ensure complete compliance
CABLE GLAND TYPES
CABLE GLAND TYPES
T3CDS & T3CDSPB
T3CDS & T3CDSPB
Cable
Gland
Size
Available Entry Threads Thread
Length
metric
Cable
Bedding
Diameter
Overall Cable
Diameter
Armour Wire Diameter
Across
Flats
Across
Corners Protrusion
Length
Ordering
Reference
(Brass Metric)
**
Cable
Gland
Weight
(Kgs)
Standard
Option
Grooved Cone Stepped Cone
Metric
NPT
NPT
Min Max Min* Max
Min
Max
Min
Max
Max
Max
20S/16
M20
1/2"
3/4"
15.0
3.2
8.7
6.1
13.4
0.15
0.5
0.9
1.0
24.0
25.9
70.0
20S16T3CDS1RA 0.170
20S
M20
1/2"
3/4"
15.0
6.1
11.7 9.5
15.9
0.15
0.5
0.9
1.25
24.0
25.9
70.0
20ST3CDS1RA
0.170
20
M20
1/2"
3/4"
15.0
6.5
14.0 12.5
20.9
0.2
0.5
0.9
1.25
30.5
32.9
72.0
20T3CDS1RA
0.256
25S
M25
3/4"
1"
15.0
11.1 20.0 14.0
22.0
0.2
0.6
1.25
1.6
37.5
40.5
82.0
25ST3CDS1RA
0.384
25
M25
3/4"
1"
15.0
11.1 20.0 18.2
26.2
0.2
0.6
1.25
1.6
37.5
40.5
82.0
25T3CDS1RA
0.379
32
M32
1"
1 1/4"
15.0
17.0 26.3 23.7
33.9
0.2
0.6
1.6
2.0
46.0
49.7
85.0
32T3CDS1RA
0.560
40
M40
1 1/4"
1 1/2"
15.0
23.5 32.2 27.9
40.4
0.2
0.8
1.6
2.0
55.0
59.4
86.0
40T3CDS1RA
0.848
50S
M50
1 1/2"
2"
15.0
31.0 38.2 35.2
46.7
0.2
0.8
2.0
2.5
60.0
64.8
98.0
50ST3CDS1RA
1.055
50
M50
2"
2 1/2"
15.0
35.6 44.1 40.4
53.1
0.3
0.8
2.0
2.5
70.0
75.6
100.0
50T3CDS1RA
1.521
63S
M63
2"
2 1/2"
15.0
41.5 50.0 45.6
59.4
0.3
0.8
2.0
2.5
75.0
81.0
108.0
63ST3CDS1RA
1.750
63
M63
2 1/2"
3"
15.0
47.2 56.0 54.6
65.9
0.3
0.8
2.0
2.5
80.0
86.4
103.0
63T3CDS1RA
1.685
75S
M75
2 1/2"
3"
15.0
54.0 62.0 59.0
72.1
0.3
0.8
2.0
2.5
89.0
96.1
105.0
75ST3CDS1RA
2.345
75
M75
3"
3 1/2"
15.0
61.1 68.0 66.7
78.5
0.3
0.8
2.0
2.5
99.0
106.9
114.0
75T3CDS1RA
3.200
90
M90
3"
3 1/2"
24.0
66.6 79.3 76.2
90.4
0.4
0.8
3.15
3.15
114.0
123.1
140.0
90T3CDS1RA
5.100
100
M100
4"
4 1/2"
24.0
76.0 91.0 86.1 101.5
0.4
0.8
3.15
4.0
123.0
132.8
170.0
100T3CDS1RA
6.500
115
M115
4 1/2"
5"
24.0
86.0 98.0 101.5 110.3
0.4
0.8
3.15
4.0
133.4
144.1
210.0
115T3CDS1RA
7.000
130
M130
5"
6"
24.0
97.0 115.0 114.2 123.3
0.4
0.8
3.15
4.0
146.1
157.8
250.0
130T3CDS1RA
7.800
Dimensions are displayed in millimetres unless otherwise stated
LISTED MARINE SHIPBOARD
CABLE FITTING
31YM
29NX
TECHNICAL DATA
CABLE GLAND TYPE
: T3CDS / T3CDSPB
INGRESS PROTECTION
: IP66, NEMA 4X, DELUGE TO DTS01-01
PROCESS CONTROL SYSTEM
: BS EN ISO 9001
: ISO / IEC 80079-34:2011
HAZARDOUS AREA CLASSIFICATION
ATEX CERTIFICATION No
: SIRA 06ATEX1283X & SIRA 06ATEX4328X
ATEX CERTIFICATION CODE
:
II 2 GD Ex d IIC / Ex e II / Ex nR II / Ex tD A21 IP66
IEC Ex CERTIFICATION No
: IEC Ex SIR.07.0005X
IEC Ex CERTIFICATION CODE
: Ex d IIC / Ex e II / Ex nR II / Ex tD A21 IP66
CSA CERTIFICATION No
: CSA.02.310517X
CSA CERTIFICATION CODE
: Class I Div 2 Gp, A, B, C, D; Class II Div 2 Gp E, F, G; Class III
UL CERTIFICATION FILE
: E200163, E256367
UL CERTIFICATION CODE
: Class I, Zone 1, AEx e II; TYPE 4X, OIL RES II
INSTALLATION INSTRUCTIONS
Installation should only be performed by a competent person using the correct tools. Spanners should be used for tightening. Read all instructions
before beginning installation.
SPECIAL CONDITIONS FOR SAFE USE
1. The glands ranges shall only be used on enclosures where the temperature, at the point of mounting, is in the range -60°C to +130°C.
2. When used with braided cable, the cable glands shall be used for fixed installations only. Cables must be effectively clamped to prevent twisting
and pulling.
3. When used in Group I applications, the equipment must only be mounted where the risk of mechanical impact is low.
ACCESSORIES
The following accessories are available from CMP Products, as optional extras, to assist with fixing, sealing and earthing :-
Locknut | Earth Tag | Serrated Washer | Entry Thread (I.P.) Sealing Washer