Cyron Lighting OLS12A - Manual

OLS12A Campsite Locator Beacon System
Thank you for choosing CYRON products! At CYRON we are committed to
provide the latest lighting technology without any compromises.
Please read all instructions and follow carefully .Should you need help you
may contact CYRON customer support at 818-772-1900 x106 or
[email protected]. Alternatively, you may seek assistance from an
authorized CYRON dealer near you.
COMPONENTS:
1 x Light stick 1 x Controller box 1 x Remote control key fob
1 x Extension cord, 25ft 1 x Flagpole mount stud 1 x Velcro strap (packaged with extension cord)
TOOLS NEEDED:
None
OVERVIEW:
CYRON OLS12A Campsite Locator Beacon Light is primarily used for locating and differentiating your campsite. It emits
light in various colors & patterns to visually identify you and your location from others. Its visual signal can be identified
from miles away
1
. Flashing light modes can be a perfect tool for relaying a visual message, such as flashing red for
emergencies, green for call back to camp, or blue for when the meal is being served. Make your own designations, have
fun, and stay safe.
CAUTIONS:
Keep controller in dry location.
Do not attach flags, streamers or any other objects to the light stick.
Do not put extra force on clear lens or attempt to bend.
Do not over tighten the mounting bolts and studs.
Remove light before vehicle is underway.
Not intended for use as an off road whip light.
Do not submerge any part of this lighting system.
a
Do not use during lightning storm. Extreme chance of injury and electrocution.
INSTRUCTIONS:
1. Connect Wires:
CYRON Campsite Locator Light Beacon is provided with a 25ft extension cord. It should be
long enough to reach the top of most all flagpoles which are normally 22ft or less. Should longer cords be
needed, extra extension cords are available from CYRON, Inc. or your local CYRON dealer.
Connect light stick to extension cord. Press male & female ends completely together. Thread the retainer
ring. Do not over tighten. Connect other end of extension cord to the controller.
2. Mount Light Stick:
Mount the light stick using the flagpole stud or through hole bolt. Do not over tighten.
3. Secure Wire:
Secure wire at the top of flagpole with Velcro strap provided. NOTE: The strap is packaged
with the extension cord. This will provide a security should the light stick fall out for any reason. Remove
the light stick during extreme foul weather, thunderstorms or tornados. When mounting on a flagpole, wrap
the wire around the pole three turns to minimize slack in the wire.