JELD-WEN JII102 Wood Pocket Door Frames - Manual

INSTALLATION INSTRUCTIONS
for Wood Pocket Door Frames (JII102)
Note to Installer: Provide a copy of these instructions to the building
owner. By installing this product, you acknowledge the terms and
conditions of the limited warranty as part of the terms of the sale.
Thank you for selecting JELD-WEN products. Attached are JELD-WEN’s
recommended installation instructions for Wood Pocket Door Frames.
Read these instructions thoroughly before beginning. They are designed
to work in most existing applications, however; existing conditions
may require changes to these instructions. If changes are needed, they
are made at the installer’s risk. For installations other than indicated in
these instructions, contact a building professional.
Estimated Install
Time for New
Construction
First Time: 3 hrs
Experienced: 2 hrs
Professional: 1 hr
1
2
3
4
5 6 7
8
9
10
11 12
SaFety & haNDlINg
SAFETY
Read and fully understand all manufacturers’ instructions before •
beginning.
Do not work alone. two or more people are required. Use safe lifting
•
techniques.
Wear protective gear (e.g. safety glasses, gloves, ear protection, etc.).
•
Operate hand/power tools safely and follow manufacturer’s operating •
instructions.
Be cautious of plumbing and electrical lines when cutting into walls.
•
MATERIALS & HANDLING
Inspect product for cosmetic damage and verify correct size. •
heed material manufacturers’ handling and application instructions. •
handle in vertical position; do not carry flat or drag on floor. •
Do not put stress on joints, corners or frames. •
Store in dry, well-ventilated area in vertical, leaning position to allow •
air circulation; do not stack horizontally.
Protect from exposure to direct sunlight during storage.
•
IF INJURY OCCURS, IMMEDIATELY SEEK MEDICAL ATTENTION!
INCLUDED PARTS
INclUDeD PaRtS & NeeDeD tOOlS
a - Face jamb
B - top track
c - Pre-assembled pocket frame
D - Wheel hanger
e - adjusting bolt F - lock nut
g - hanger bracket
h - (4) 1 1/2" pan head screws
I - Nylon guide
J - adjusting wrench
NEEDED TOOLS
tape measure •
Utility knife •
level (4' minimum •
recommended)
hammer •
Screw gun •
3 pound maul •
NEEDED MATERIALS
#10 x 2" screws •
Finishing supplies •
a
B
D
c
e
F
g
I
h
J