JKS OGS920 - Manual

JKSOGS920 FAB Track Bar Relocation Bracket Page 1
INSTALLATION
INSTRUCTIONS
Product: FAB Trackbar Relocation Bracket
Part Number: JKSOGS920
Applications: Wrangler TJ, 1997-06
Cherokee XJ, 84-01 (non-CAD)
Grand Cherokee ZJ, 1993-98
Welcome
CONGRATULATIONS on purchasing the FAB over axle
track bar bracket from JKS Manufacturing. We are commit-
ted to providing you with the best products available and
your satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Important
NOT COMPATIBLE with vacuum actuated central axle
disconnect axles
NOT COMPATIBLE with right hand drive vehicles
Will not fit Jeep JK or WJ models
This bracket is designed for use with a custom high
steer upgrade and new track bar. The track bar, steer-
ing components, and sway bar mounts will need to be
modified for use with this bracket
Tools Required
 Welder
 Cutoff Wheel
Parts
Description QTY
A Over Axle Track Bar Bracket 1
Installation
‰ 1. PRePARe fRONT AxLe
 Remove the factory steering stabilizer and track
bar from the axle mounts.
 The factory steering stabilizer mount needs to be
removed from the factory track bar bracket.
 Using an appropriate cutting tool, cut the stabilizer
bracket at the welds and remove it from the axle
as shown.
 The new bracket is designed to sit flush against
the coil bucket. Make a cut inline with the front
face of the coil bucket surface as shown.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036