JKS OGS151 - Manual

JKSOGS151 JKS Adjustable Track Bar Installation Page 1
INSTALLATION
INSTRUCTIONS
Product: Adjustable Track Bar
Part Number: JKSOGS151
Applications: Wrangler TJ, 1997-06 (rear only)
Welcome
CONGRATULATIONS on purchasing a new Adjustable
Trackbar from JKS Manufacturing. We are committed to
providing you with the best products available and your
satisfaction is our first priority.
PLEASE READ these Installation Instructions carefully,
and save them for future reference, as they contain impor-
tant installation and maintenance information.
Tools Required
 Hydraulic Floor Jack & Jack Stands
 Metric/Standard Socket Wrench Set
 Torque Wrench
 1-1/2” Open-End Wrench
 T55 Torx Driver (for OE track bar bolt)
 Tape Measure
 Heavy Duty Ratchet Strap *
 Anti-Seize Lubricant
 Grease Gun with Zerk Fitting Coupler
 Wheel Bearing Grease
* Asterisk denotes tools that are not required for some applica-
tions. Thoroughly read instructions first to determine which tools
will be required for your application.
Parts
Description Part No. QTY
A Female Threaded (Chassis) End 03053 1
B 1” NF Jam Nut 36270 1
C Male Threaded (Axle) End 03054 1
D Sleeve 138 1
E Polyurethane Bushing Half M03618-BK-01 2
F Snap Ring CE91125 1
G Spherical Bushing CEES9385 1
H Spherical Ball CE911225 1
I Retaining Washer CE91126GM 2
J Grease Zerk 7201 1
Important
VEHICLE MUST BE EQUIPPED with a CV type
driveshaft if installing this product with angled reloca-
tion bracket on axle housing.
NOT COMPATIBLE WITH right hand drive vehicles.
CHECK TORQUE SPECIFICATIONS regularly.
517-278-1226 • [email protected] • www.jksmfg.com
491 W. Garfield Avenue, Coldwater, MI 49036