PowerTap PowerCal 2012 User Manual
Powercal
PowerCal
(Models 7150 & 7151)
User Guide | Guía de usuario | Mode d’emploi | Benutzerhandbuch |
Manuale dell’utente | Gebruikershandleiding
ABOUT POWERCAL
PowerCal is a unique chest strap that is both a heart rate monitor and a power meter. PowerCal measures your heart rate and, using an
algorithm, calculates your power output. PowerCal can be paired to any ANT+ device or watch that displays power and heart rate such as a
CycleOps Joule.
PACKAGE CONTENTS
1x PowerCal (CR2032 battery installed)
1x User Guide
1x Speed Sensor (model 7151 only)
Mounting hardware for sensors
(model 7151 only)
1.1: For best results lightly moisten the electrodes where contact is made with skin.
Ensure both snaps on the strap are securely connected to the sensor.
1.2: Position the
PowerCal on your torso as shown. When a heart rate signal is detected, the PowerCal
wakes up and immediately begins transmitting both heart rate and power information.
PUT ON THE POWERCAL
1
Pairing is the process of connecting PowerCal to your desired ANT+ compaitble display
device. Please consult the user guide that came with your ANT+ device for the pairing of
power
2.1 and heart rate 2.2.
2
PAIR Joule/ANT+ device to PowerCal.
1.1
Back of PowerCal
Electrodes
Electrodes
1.2
Joule or ANT+
Power display
capbable device
PAIR
POWER
Joule or ANT+
Power display
capbable device
PAIR
HR
2.1
2.2
GETTING STARTED
TECHNICAL SPECIFICATIONS
• Signal Transmission: 2.4 GHz
• Operational Temperature: 0-40C/32-103F
• Battery Type: CR2032
• Battery Life: 600 Operational Hours