Rocky Mountain Radar RMR-DLS310 User Manual

Rmr-dls310, Rocky mountain r ▲d▲ r

Advertising
background image

1. Introduction

Dear Rocky Mountain Radar Owner,

Congratulations on your purchase of one of the world’s most
sophisticated radar/laser detectors. The RMR-DLS310 is a completely
integrated radar/laser detector which responds not only to all the radar
guns in use today, including “Stalker”, but also to the other latest
development in speed monitoring devices- the laser gun.

This unit scrambles all police laser speed measurement devices and
operates automatically.

This model provides distinct visual and audible alerts to warn you of the
presence of X, K, and all kinds of Ka Band radar guns in the front and
rear of you. This model also provides the benefit of ‘undetectability’ by
alerting you to the presence of VG-2 (‘The Radar Detector detector’).

It also incorporates a new safety feature - Safety Alert(SA) and Safety
Warning System(SWS). This safety feature warns you of the presence of
potential road hazards by detecting signals from safety radar transmitting
devices.

Note :

Important : The RMR-DLS310 is not designed to help you disobey
the law. A defensive driver always obeys the posted speed limit and
legal driving methods.

Federal and Local Regulations

The FCC passed the Communications Act in 1934 to give all citizens the
right to receive all types of radio transmissions. The same radio frequencies
used by police radar are also used by other devices, such as automatic door
openers, burglar alarms, and some amateur radio equipment. Since the
RMR-DLS310 is just a radio receiver tuned to a specific portion of the public
radio spectrum, it is protected under this act.

Some local, state, and federal regulations may prohibit the use of this
detection device. Please check with authorities regarding the use of this
device before operating it.

2. Control and Features

1) Included with your Radar Detector

Hook and Loop Fastener Tape

Power Cord

Spare Fuse

RMR-DLS310

Windshield Bracket with

Suction Cups

2) Controls and Functions

a. On/Off Volume Control

b. Dim Button

c. Mute Button

d. City Button

e. DC 12V Power Input Jack

f. Radar Antenna

g. Front Laser Detection Lens

h. Rear Laser Detection Lens

Receives incoming laser signals from rear

i. Power-On and VG-2 Indicator

j. X Band Indicator

k. K/Ka Band Indicator

l. City Indicator

m. Laser Scrambler Indicator

Laser Scrambler Indicator is always “ON”.

Ticket Rebate

1

2

3

4

RMR-DLS310

Advanced Micro Technology Design / 360 Degree

Safety / Radar Laser Detector / Laser Scrambler

g

h

b

c

d

e

a

f

3. Installation

1) Mounting Guidelines

For the best performance, select the proper location for the unit
where it has a direct view of the road. The radar antenna is located
behind the rear panel of the unit and the laser detection lenses are
located behind the rear panel of the unit and the front window. The
antenna and sensors should not be obstructed by metal or metallic
surfaces and should be pointed at the horizon for accurate long
range detection.

·

Choose a location that does not block the driver’s vision.

·

Mount the detector in a level position.

·

Do not mount the detector behind metal surfaces, windshield

antenna, wiper blades, ornaments, or mirrored glass.

·

Heated windshields, currently available as an option on some Ford

(Instaclear) or GM(electriclear) vehicles act as an impenetrable
barrier to radar signals.

·

Do not mount the detector where the driver or passenger might

collide in the case of an abrupt halt.

N o t e

: Whichever mounting method you choose, remember to

place the radar detector out of view when you leave your
vehicle.
This keeps the detector out of sight from thieves and
prevents exposure to extremely high temperatures.

N o t e

: If necessary, you may adjust the bracket to the proper angle

by bending it. To remove your detector, pull up the detector
from the front pulling it towards you.

Caution

: On some newer model cars, a plastic safety coating has

been applied to the windshield. The suction cups may leave
permanent marks on the windshield once they are removed.
Check your vehicle owner’s manual to see if your car has
the plastic safety coating.

2) Mounting Types

A. On Windshield

a. Attach bracket to windshield.

b. Bend bracket for correct detection angle.

c. Plug Power cord into detector.

d. Attach bracket to detector.

e. Plug power cord into cigarette lighter.

B. On Dashboard

a. Peel protective paper off one

side of hook-loop.

b. Tape on detector

s bottom.

c. Peel top paper off.

d. Place detector on dashboard.

e. Plug power cord into detector and cigarette lighter.

3) Power Connection

The coiled power cord provided with the unit has a cigarette lighter

socket plug at one end and a small connector on the other.

1. Insert the small connector into the jack on the side of the unit.

2. Insert the other end into the cigarette lighter socket of your vehicle.

If the detector does not operate when you turn it on, remove the

adapter from the cigarette lighter socket and carefully check the

socket for debris. Also, check the fuse in the adapter and your

vehicle fuse box.

4) Replacing Fuse

a. To replace the fuse, unscrew the top of the plug.

b. Remove and check the fuse to see if it has blown, If it has, replace it.

5) MAIL IN TICKET REBATE REGISTRATION CARD WITHIN 30

DAYS.

4. Operation

1) Power and Volume Control

Turn on and adjust volume.

Note

: Turning on the detector will trigger the Self-Test mode.

2) Dim Mode

·

Press Dim Button.

An audible warning sound will alert you that Dim mode

has been activated.

Each time you press Dim button, display intensity will

change dim, dark, bright.

5

6

7

8

ROCKY
MOUNTAIN
R ▲D▲ R

EI Paso, TX.

6469 Doniphan

El Paso, TX 79932

(915)587.0307

fax(915)587.6408

Owner’s Manual

ROCKY MOUNTAIN RADAR

Advertising