Airlink101 MIMO XR AWLH5026 - Manual

Ver. 1A
Package Content:
•
Wireless PCI Adapter
• Driver & Utility CD
•
Quick Installation Guide
Model # AWLH5026
Section 1
Install Utility Software
Quick Installation Guide
MIMO XR™ 802.11g PCI Adapter
This Quick Installation Guide only provides the basic instructions. For more
advanced features such as configuring encryption settings, please refer to the
User’s Manual in the provided CD.
Note: Be sure to power off your computer before inserting the PCI adapter.
For Windows 98SE and ME users, you may be prompted to insert the Windows
98SE or ME CD during the driver installation. Be sure to have your Windows 98SE
or ME CD ready.
Step 1 Insert the PCI adapter into an available PCI slot and turn on your
computer.
Step 2 After turning on the computer, Windows will launch the Found New
Hardware Wizard. The Found New Hardware Wizard appears differently
depending on your operating system. Click Cancel to quit the wizard and insert
the Driver & Utility CD into your CD drive.
Note: If the Autorun screen doesn’t appear automatically go to Start, Run, type
D:\Utility\Setup.exe (where D is the letter of your CD drive) and click OK to install
the utility directly.
Step 3 The Autorun screen will pop up. Select Install Utility from the menu.