Spyder Auto Proper Headlight Adjustment for Spyder Auto Headlights - Manual

Proper Headlight Adjustment for Spyder Auto Headlights
There are many factors involved when you are adjusting your headlights; ride height, age, and of course general wear
and tear. It’s no secret that headlights are the most important factor when talking about safety on your vehicle. This is a
handy guide to adjusting your headlights for an optimal beam pattern and vision line.
First, locate your headlight adjustment knobs. Spyder Auto uses a multitude of different adjustment knobs based on the
headlight set you have. Here you will see an example of each of them:
Next locate the tools that will be needed to adjust your headlamps. Note: Please do not ever use power tools on your
adjusters this may cause severe damage to the internals of your lights.
Next, on a level surface, back your vehicle 25 feet away from a wall. Check your owners manual to see what their
optimal distance may be. For example – Toyota suggests you should be 10 feet away from a wall and Chrysler suggests
for you to be 33 feet away from a wall. This is for your STOCK headlight system, Spyder Auto recommends that you are
25 feet away.
Make sure you are doing this at night with a passenger inside of the vehicle. To test east side of the light cover it up with
a jacket or stand in front of it. Make sure not to do it for too long, you don’t want the headlight to retain an excess
amount of heat.