C-TECH-I Imperiale LI-VLV-9 - Manual (Page 3)

C-TECH-I, INC
USERS' GUIDE
4. Take the two screws through the rubber washer and metal washer.
Then revolve the two locknuts onto the screw（See figure 4 and figure 5）;
14
12
13
16 and 17
Figure 4
16 and 17
14
12
13
15
Figure 5
Revolve
5. Revolve the locknut and fix the faucet on the wash basin by the washers (See
figure 6);
Figure 6
6. Before connecting the inlet hose to the indoor water supply pipe, you should
pay attention to the three points as follows:
1) Flush the pipe;
Flush the pipe
2) There are no stings at the ends of the water supply pipe;
3) Using other seal materials at the ends of the inlet pipe is not allowed.
3