Monoprice 4652 Recessed Pro Power Kit - Manual

ETL LISTED
CONFORMS TO
UL STD 514C
CERTIFIED TO
CAN/CSA STD C22.2 NO. 42.1
Recessed Pro-Power Kit with
Straight Blade Inlet
45-0023
Use DataComm Electronics’ Recessed
Pro-Power Cable Kit with Straight Blade
Inlet to install power and low voltage
cables from behind your flat panel TV,
your amplifier or other audio and video
devices to your equipment room. The
45-0023 Recessed Pro-Power Cable
Kit can be installed upright or upside
down.
Using the local electrical code approved
installation, pull an approved14/2 with
ground or 12/2 with ground building
wire cable from the installed Recessed
Low Voltage Cable Plate with Power to
the selected site in the equipment room.
Install a new or old workbox before installing
the Recessed Pro-Power Cable Plate with
Straight Blade Inlet. This is a non-energized connection. To energize this connection,
simply plug the supplied 6 ft. straight blade extension cord into the recessed straight blade
inlet and plug the straight blade end of the extension cord into your rack mounted surge
protector.
DataComm Electronics
6349 Peachtree St.
Norcross, GA 30071
888.223.7977
770.662.8205
www.datacommelectronics.com
3026001
45-0021-WH Plate, 45-0023-WH Plate &
6 Ft. Straight Blade Extension Cord
U.S. Patent Numbers D553475, D554475
and 7390964
RoHS Compliant
The Receptacle is an UR, UL Recognized Component
Front View Back View