Monoprice 8134 Tone Generator Probe - Manual

FEATURES:
Red and black test leads are provided, and has a standard 4 conductor modular
cord and plug.
A 3-position toggle switch controls the modes of operation plus a 3-colored LED
Light Emitting Diode is provided for line polarity, continuity and voltage testing.
A tone selector switch, located inside the test set is provided for choosing either
a single solid tone or dual alternating tone.
(CAUTION: DO NOT CONNECT TO AN ACTIVE AC CIRCUIT EXCEEDING
24V IN THIS MODE.)
MAINTENANCE:
The Amplifier Probe is maintenance free except for battery replacement.
Remove the screw from the battery compartment, replace the 9V battery and
reassemble.
Warranty limited solely to repair or replacement; no warranty of merchantability,
fitness for a particular purpose or consequential damages.
INSTRUCTIONS:
1. Connecting the Tone Generator.
In terminated working cables:
Connect one test lead to a terminated wire and other test lead to earth or
equipment ground.
In unterminated or non-working cables:
Connect one test lead to an unterminated wire and the other test lead to
another unterminated wire.
2. Depress the round on/off spring-loaded button of the amplifier probe. The
volume control switch can be adjusted to suit the environment. Volume can
be increased to overcome noise, or decreased to reduce interference.
3. Touch the tip of the amplifier probe to the insulation of each suspect conductor.
4. Reception of tone will be loudest on the subject wire.
5. The plug receptacle is provided for connecting to a head set or hand set.
Tone Generator Tone Generator
- 2 -
Tone Generator
Amplifier Probe
Red and black
test leads
3-colored LED
Test button
Speaker
Tip
4conductor
modular cord
and plug
User's Guide
PRO LAN TRACER / TONER PRO LAN TRACER / TONER
FEATURES:
The Amplifier Probe is designed to identify and trace wires or cables within a
group without damaging the insulation.
Works with any Tone Generator to identify wires.
Volume control for increased sensitivity and adjustable to suit work environment.
Recessed ON/OFF button prevents battery drain.
Power supply is in any 9V battery with a life of approximately 100 hours.
A plug receptacle is provided for head set or head phone.
Amplifier Probe Amplifier Probe
- 1 -
Phone jack 3-position
toggle switch
Volume control