Pure Jongo - Set_Up_Guide - Manual

Setting up and connecting your Jongo device to your network
There are a few things you need to have in place before connecting your Pure Jongo device.
Please read the following check list and make sure you have everything you need before you start.
1. A wireless internet router.
2. The name of your wireless network.
3. Your personal wireless network security key – otherwise known as a WEP or WPA key.
4. The Pure Connect App installed on your Apple or Android device.
(Just download for free from the Apple App Store or Google Play)
Connecting your Jongo
Plug in your Jongo to the mains socket and turn your Jongo on by pressing the power button on Jongo
Wait for the Jongo to boot up, this is when the LED light around the power button turns solid green (this takes
about 5 seconds, or less)
Press the Wi-Fi button, just with one quick tap.
Then wait a couple of seconds and you will now see the LED around the power button flash amber.