Checkers All Purpose Whip - Manual

620 COMPTON ST • BROOMFIELD, COLORADO, USA 80020
800-438-9336 • www.checkersindustrial.com
Ver: ALLPWINST-3/14
1. Remove jam nut and lock washer from hex base
2. Attach hex base directly to vehicle or bracket
using lock washer and jam nut. Requires 1/2”
mounting hole.
3. Strip yellow jacket from hot plug with pigtail to
desired length
4. Strip the insulation from each conductor to
desired length. Please note that the white wire
with black strip is the hot wire and the white wire
is the ground wire.
5. Use wire connectors of your choice to attach to
your desired power supply.
INSTALLATION INSTRUCTIONS
GORILLA® ALL PURPOSE WARNING WHIPS
From the Experts in Industrial Safety
1
3 3
2
4
Patent Pending