American DJ Sapphire 4 - Manual

American DJ
® LOS ANGELES, CA. 90058
Model:
Sapphire 4™
SPECIFICATIONS:
Lamp: 300W 120V 64514 lamp
Power: 110V/60Hz
Colors: Multiple Dichroic
Optics: High Quality Glass Lens
Reflective Surface mirror
Ventilation: Fan Cooled
Duty Cycle: 10 Minutes On 10 min. Off
Weight:
12 lbs.
Size: 20.5” x 7.25” x 5.75”
Fuse: 7 A
Working Position: Any
HALOGEN LAMP WARNING!
This fixture is fitted with halogen lamps
which are highly susceptible to damage if
improperly handled. Never touch lamp
with bare fingers as the oil from your
hands will shorten lamp life. Also, never
move fixture until lamp has had ample
time to cool. Remember, lamps are not
covered under warranty conditions.
Thank you for purchasing this fine
American DJ® product. For your conve-
nience this lighting effect has been
lamped and tested for quality and is
ready to be used, there is no assem-
bly required. Please read the follow-
ing instructions before installing or
using your new unit.
Operating Instructions:
This unit is ready to be hung or set on the ground.
After plugging this fixture in, the units X-axis mirror
will move to the beat of the music. The Sapphire
4™ features a multi-color dichoics dish that will
also rotate to the beat of the music. This fixture
also features a new case design with extruded alu-
minum, a hanging bracket, and is sound activated
by adjust the sensitivity knob located on the bot-
tom of the unit next to the power cord. This fixture
is designed for mobile DJ’s, clubs, bands, roller
rinks and any arena that requires a bright easy to
use fixture.
To replace lamp; Remove the thumb screw and
lift the lamp cover. Disconnect the lamp from the
socket. Remove and replace lamp. Reassemble.
For service, contact your American DJ® dealer.
Caution! Always disconnect from main
power before replacing lamps or servicing unit.
Remember to always replace with same lamps
and fuses.
American DJ
®
User Instructions
Sapphire 4™