Maxsa Innovations 3 Outlet Power Adapter - Manual

WARNINGS
1. Do not plug devices into the 3 Outlet Power Adapter that exceed 120 watts total power or draw more than 15A
total current combined for all devices.
2. A device that draws significant current may drain your vehicle’s battery if the device is left on while the vehicle’s
engine is not running.
3. Please turn the ON/OFF switch to OFF (O) when the 3 Outlet Power Adapter is not in use.
INSTRUCTIONS
1. Plug the 3 Outlet Power Adapter into your vehicle’s 12V power outlet (cigarette lighter socket).
2. Plug the device that you want to use into one of the 3 outlets.
3. Turn the ON/OFF switch located on the 3 Outlet Power Adapter’s plug to the ON ( l ) position.
TROUBLESHOOTING
If a device does not turn on after being plugged into the 3 Outlet Power Adapter:
1. Check to make sure that the 12V power outlet (cigarette lighter socket) in your vehicle is receiving power. In
many vehicles, the ignition key must be turned to the “Accessory” or “On” position for the 12V power outlet to
work.
2. Check to make sure that the 15A fuse in the 3 Outlet Power Adapter is intact. If the fuse burned out, first remove
any device(s) drawing excess current. Unplug the 3 Outlet Power Adapter from your vehicle’s 12V power outlet.
Remove the old fuse and install an identical 15A fuse. Plug the 3 Outlet Power Adapter back into the 12V power
outlet in your vehicle.