Maxsa Innovations Park Right BallPark User Manual

Parking ball

Advertising
background image

PARKING BALL

Park in the exact right spot every time!

4 red LEDs create a light show when the ball hits the car window.

Includes eye hook and 8 foot line.

Includes 3 replaceable batteries, which last for up to 800 activations.

Warnings:

Choking hazard. Contains small parts. Not for children under 3 years of age.

The Parking Ball is for parking reference only. Always use caution when parking. MAXSA Innovations will
not be liable for personal or property damage arising from use of the Parking Ball.

Installation:

1. Pull out and discard the white Try Me tab extending from the battery compartment.

2. Park vehicle carefully in desired position.

3. Visually locate a spot on the ceiling to hang the Parking Ball. The mounting location should be directly
above the center of the windshield.

4. Remove vehicle. Screw eye hook into the ceiling and let the string hang.

5. Drive vehicle into the desired position again.

6. Thread the hanging string through the hole on the top of the Parking Ball. Adjust the length so that
the Parking Ball contacts the center of the windshield.

7. Tie the string securely to the Parking Ball.

Battery Replacement:

1. Remove the two screws on the top of the Parking Ball using a small Phillips screwdriver.

2. Remove the old batteries and replace with three (3) AG13 button cell alkaline batteries (L1154, LR44,
A76, or PX76A models will also work). Make sure the positive (+) side of the batteries face the spring in
the battery compartment.

3. Replace the cover.

Note: Dispose of used batteries properly. Do not dispose by general household refuse or into a fire. You
can also return the used batteries from this product to MAXSA Innovations for recycling or proper
disposal.

MAXSA Innovations, LLC

Creating Unique Products
8412 Cathedral Forest Drive
Fairfax Station, VA 22039
703-495-0661 (office)
703-495-9037 (fax)

Advertising