ASA Electronics Universal Remote - Manual

1
TBXPAL
Remote Operation (1)
Button Function
1. POWER Power On/Off
3. A/P (AUTO PROGRAM) Channel Scanning
4. / 5./ 14./ 16. ( ▲ ◄ ► ▼) Up/Down/Left/Right
6. CH (+/-) Channel Up/Down
7. 1/2/3/4/5/6/7/8/9/0 Numbers
8. LED TV Mode – Red Flash
DVD Mode – Green Flash
9. TV TV Mode Selected
11. MUTE (TV) Mutes Audio
12. MENU OSD Menu for TV setting
13. ENTER Select Input
15. VOLUME (+/-) Audio Increase/Decrease
17. RECALL Channel Return
To prevent battery leakage which may result in
bodily injury or damage to the remote:
1. Install all batteries correctly, + and
– as
marked on the remote control.
2. Do not mix batteries:(OLD and NEW or
CARBON and ALKALINE, etc.)
3. Remove batteries when the remote is not
used for a long time.
Notes:
1. Some buttons on remote have two functions (for TV & DVD mode). When press the TV button, the remote will get in TV function mode,
each time when press the TV function button, the LED will flash “RED” light. When in DVD mode, each time when press the DVD
function button, the LED will flash “GREEN” light.
2. Some of buttons are designed for operating single disc DVD player, pls read the DVD manual to operate the DVD player
TV Mode